Wood Working/Wood Industry Equipment (Used) Newsgroup

Location: USA, WEST COAST

Spray Machine - GIARDINA, 4' Dualtech 601 .
Super Controlled Finishing. - Complete 51 in. Finishing Line designed for stain, sealer & topcoat for finishing Curing with hot water boiler for the Air Makeup system to control the input air to balance and guarantee a clean spray area and ovens. ~~ Includes (4) positions - #1: Infeed load conveyor; #2: Panel cleaning blow off unit with De-ionizing air nozzles; #3: Automatic 8-Gun 2-Spray circuit Reciprocating Sprayer and outfeed conveyor; #4 Out feed conveyor with Lexan cover.~~ Product Specifications: 11-13/16 in. Min. - 118 in. max. length; 13/16 in. min. to 48 in. max. width; 13/64 in. min. to 3 1/2 in. max. thickness. ~~ Pos. #1 - Infeed Conveyor: 60 in. Length x 51 in. width PVC covered 3 in. Die. Rollers; adjusted variable speed from 6 - 35 FPM, 0.33 HP drive motor. ~~ Pos. #2 - Top & Edge Panel Cleaning Machine: fixed linear blower at inlet, top de-ionizing bar; the machine in compliance with IP55. ~~ Pos. #4 - GIARDINA DUALTECH 601 Dry Automatic Spray Machine with: 51 in. Width cap., 2-1/4 in. max height. Sprays using (2) reciprocating trolleys to carry (4) KREMLIN adjustable guns each (8 guns total), variable speed & acceleration by control panel. ~~ Lexan hood to cover the exit conveyor and the belt cleaning system; it may be opened for inspection; EEX-d electric motors(except for fans and pumps which are IP 55). ~~ The suction tower & side suction boxes made in stainless steel (not galvanized steel sheet) as per standard execution; all (2) spray circuits for (4+4) guns are for UV products. ~~ Enclosure Booth consists of: Sandwich paneling; air is pulled in from (2) air intake ducts (positioned between guns) above the slanted perforated roof top panels which help to reduce turbulence; large front viewing window/access panel. ~~ Conveyor: Max. working width of 1,300 mm, (1) self-guided non-sticky & non-static special synthetic conveying belt of 1,900 mm width; wet-on-wet fully extractable conveying belt cleaning system without any abrasive action (patented). ~~ Total recovery of the lacquer deposited on the belt with the possibility to reuse it in the spraying circuit. - Rapid repositioning of the conveyor belt system thanks to the special design of the frame. ~~ (2) Spraying systems: Reciprocating gun movement controlled by brushless motor, spray circuit designed for (4 + 4) guns, with the possibility to spray with different kind of lacquer products through different circuits. ~~ Distance between the centers of the gun supporting plates: 2,300 mm. Gun plate height adjustment system; electronic control for the automatic spraying & continuous reading of the piece dimensions. ~~ Pos. #4: Suction hood 1,000 mm, Lexan transparent hood, removable. Size: 3,500 x 1,680 x 250 h. [Ref. #FS-010340] - Take advantage of the exchange rate and buy Used in the USA ~~YMFG: 2001; Very good condition